ACS355 Series 1.5kw ABB VFD ACS355-03E-04A1-4

ACS355 Series 1.5kw ABB VFD ACS355-03E-04A1-4

ACS355 Series 1.5kw ABB VFD ACS355-03E-04A1-4

Specification:

ABB ACS355 AC Frequency Inverter or Sensorless Vector Control 4.1A for 1.5KW (2HP) 400V 3 Phase Motor. Easy to set up with 400V three-phase input for standard AC induction motor or permanent magnet synchronous motor.

No keypad included.

Size R1 – 70 mm wide x 161 mm deep x 169 mm high (239 mm high with fastening and clamp plate). IP20. Weight: 1.2 kg

Overload – 150% x 60 seconds every 10 minutes, initially 175% x 2 seconds

Speed ​​control range – 0-600Hz.

Every 120 seconds to 130 ohms minimum, 300 ohms maximum external resistors (not supplied) Break to full load for 27 seconds – see the resistor options attached below or use the ‘no resistor’ button on this page.

Features – 2 x analog input, 5 x digital input, 1 x analog output, 1 x digital output, 1 x relay communication set. DC bus terminal with charge limit in a circuit for DC supply or general bus power saving application.

‘Safe Torque Off’ function in SIL 3.

Use a programmable or ABB FlashDrop tool from a PC through a drive window.

Input current – 6.9A, or 3.5A when supplied through a minimum 4.6mH AC input choke (see linked products below) to reduce the metered kVA from 4.7kVA to 2.4kVA per drive.

Input voltage – 380-480V three phase 50 / 60Hz ± 5%.

EMC Filter IEC / EN 61800-3 Second Environment C3 (Industrial)

Show Another Model