USB-CNV3 Fuji N Series PLC Programming Cable

USB-CNV3 Fuji N Series PLC Programming Cable

USB-CNV3 is the only programming where the USB interface provides both serial connection and RS232 signal conversion. Under the control of computer-driven drivers, programming simply makes it possible to mimic the traditional serial (known as COM interface) for the computer’s USB interface, thus enabling various existing programming software such as communication software, monitoring software, and other applications in general. The power supply used for this cable works directly from the USB port, but not the PLC programming interface. The two color LED data in the converter box indicates the transmitting status. USB-CNV3 Applicable to Fuji N series (NB, NJ, NS) PLC, supports maximum communication distance 1.5 km.

Features:

Fully compatible with USB V1.1 rules and USB CDC V1.1
USB-powered, current consumption 50 mA
Bod rate: 300 bps ~ 1Mbps automatically adapts to standard bod rate
Support UART data format: data bits: 7-8; Stop bits: 1, 2; Check-bit: odd / even / no parity
Supports long distance communication, the largest communication is 1.5 kilometers (19200 bps)
Each PC only fortifies one USB cable programming
Working temperature: -20 ~ +75 degrees
Wire length: 3 m; The color is blackAfter the driver installation is complete, the corresponding COM port for the USB-CNV3 programming cable will appear in the “Device Manager” window. The next step is to select this COM port in programming software and other application software and keep other communication parameters as default settings. And the following steps are exactly the same as the traditional programming cable with the RS232 interface. Long distance communication: The largest communication range between USB-CNV3 programming cable and PLC is up to 1.5 kilometers (19200 bps). The user must follow a self-made plan to extend the cable. The communication line should have five 8-twisted pairs (wires).

Show Another Model