PLC Programming Cable USBSC09-FX

PLC Programming Cable USBSC09-FX

USB-SC09-FX cable is a suitable replacement of USB programming cable for Mitsubishi FX and A-Series PLC

This cable mimics the USB port as a traditional serial port (usually COM3), enabling existing programming software to communicate through simulated traditional ports and PLC devices. The necessary data conversion tools embedded with this cable to communicate between PLC end 2 and PC USB end.

Features
Long distance communication support, max. 2 kilometers (9600 bps)
Smart LED indicator. Automatic detection of optical isolation conditions.
Body rate: 300 bps ~ 1Mbps automatically adapted.
USB bus powered, with current consumption 50 mA
Each PC supports multiple cables
Supports UART data format: data bits: 7, 8, stop bits: 1, 2, parity: odd / even / no parity
Compatible with USB V1.1 and V2.0

Usage:

USB device drivers must be installed before using the programming cable, which is available on CD-ROM sold with the cable. And for specific installation steps, please read the CD-ROM driver instruction files and details not listed here.

After the driver installation is complete, the corresponding COM port for the programming cable will appear in the Device Manager in the window. The next step is to select this COM port in programming software and other application software and keep other communication parameters as default settings. And the following steps are exactly the same as the traditional programming cable with the RS232 interface.

Smart adapter with power indication

Diamagnetic ring
High density flexible braided copper wire

Show Another Model