CJ1W-ID232 Omron Digital Input Module

Name: Unique Engineering BD
Address: Dhaka, Uttara, 1230, BD
Telephone: +8801708879884
Price range: $$

Call/ WhatsApp: +8801708-879884

Omron CJ1W-OC211 Digital Output Unit

Features:

High-speed input models available, meeting multifarious applications On Replication Time: 15μs, Off Replication Time: 90μs
Use 24VDC, 100VAC, and 200VAC models to connect devices with different types of output.
24-VDC models can be connected to devices with NPN or PNP output. There is no need to select polarity.
A digital filter can be set from 0 to 32 ms in the unit to reduce the effect of external noise.
Either a Fujitsu or MIL connector interface can be utilized.
Several models of terminal block conversion units are available, making it easy to connect to external devices.
The same polarity is used for the same general.
For models with 32 or 64 inputs.

Name	32-point DC Input Unit with MIL Connector
Model	CJ1W-ID232
Rated Input Voltage	24 VDC
Rated Input Voltage Range	20.4 to 26.4 VDC
Input Impedance	5.6 kΩ
Input Current	4.1 mA typical (at 24 VDC)
ON Voltage/ON Current	19.0 VDC min./3 mA min.
OFF Voltage/OFF Current	5 VDC max./1 mA max.
ON Response Time	8.0 ms max.
OFF Response Time	8.0 ms max.
Number of Circuits	32 (16 points/common, 2 circuits)
Number of Simultaneously ON Points	75% (12 points/common) simultaneously ON (at 24 VDC) (Refer to the following illustration.)
Insulation Resistance	20 MΩ min. between external terminals and the GR terminal (100 VDC)
Dielectric Strength	1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max.
Internal Current Consumption	90 mA max.
Weight	70 g max.

On response time will be maximum 20 μs and off response time will be 400 μs maximum, even if response is
The times have been set to 0 ms due to internal component delay
Note: Visually examine the following restrictions when connecting to a 2-wire sensor.
Ensure that the input power supply voltage is greater than the on-voltage (19 V) and its residual voltage
Sensor (about 3V).
Use a sensor with a load current of at least 3 mA per minute
If you connect a sensor with a load current of at least 5 mA or more, connect to the bladder resistance.