Beckhoff EtherCAT EL2008 Digital Output Terminal
The Beckhoff EL2008 Ethercat connects binary 24 V DC control signals from digital output terminal automation devices to process level level actuators with electrical isolation. Each Ethernet terminal has eight channels which indicate their signal status through a light emitting diode.
Special features:
- Different types of load connection possible (ohmic, inductive, lamp load)
- Maximum output current 0.5 A per channel
- Short-circuit-proof output and reverse polarity protection
Specification:
Connection technology | 1-wire |
Number of outputs | 8 |
Nominal voltage | 24 VDC (-15 %/+20 %) |
Load type | ohmic, inductive, lamp load |
Distributed clocks | – |
Max. output current | 0.5Amp (short-circuit proof) per channel |
Short-circuit current | typ. < 2 A |
Reverse voltage protection | yes |
Breaking energy | < 150 mJ/channel |
Switching times | typ. TON: 60 µs, typ. TOFF: 300 µs |
Current consumption E-bus | typ. 110 mA |
Electrical isolation | 500 V (E-bus/field potential) |
Current consumption power contacts | typ. 15 mA + load |
The bit width in the process figure | 8 outputs |
Configuration | no address or configuration setting |
Weight | approx. 55 g |
Operating/storage temperature | -25…+60 °C/-40…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 20/see documentation |
Pluggable wiring | for all ESxxxx terminals |
Approvals/markings | CE, UL, ATEX, DNV GL, IECEx, cFMus |
Reviews
There are no reviews yet.